Peel-and-Stick Waterproof Butyl Tape for Roof & Gutter Seams

Peel-and-Stick Waterproof Butyl Tape for Roof & Gutter Seams

2" × 16.4 ft
$18.99
Sale price  $18.99 Regular price  $37.99
Skip to product information
Peel-and-Stick Waterproof Butyl Tape for Roof & Gutter Seams
1/7

Peel-and-Stick Waterproof Butyl Tape for Roof & Gutter Seams

$18.99
Sale price  $18.99 Regular price  $37.99
size2" × 16.4 ft

Butyl Sealing Tape for Gutters and Exterior Seams

Cover a gutter joint with a short patch or cut a longer strip for a metal panel seam. This flexible, self-adhesive butyl tape helps keep rainwater out by bonding to the surface on both sides of the seam.

Each roll is 2 inches wide and 16.4 feet long (5.08 cm × approximately 5 m). Measure the length of your seam and check that the strip is wide enough to reach clean, solid material on both sides.

Find the Right Spot for a Patch

Typical projects include gutter joints, sheet metal seams, and greenhouse frame edges. For an RV roof, plastic panel, or coated surface, check the material manufacturer’s guidance on butyl adhesive before applying.

Peel Back the Liner to Expose the Adhesive

The release liner keeps the butyl adhesive covered while you measure and cut. Once the strip is in position, peel the liner back a little at a time and press the adhesive into contact with the surface. The silver grid facing stays on the outside.

Follow Bends and Edges

The flexible strip can follow a gutter lip or the curve of a downspout joint. Smooth it along the bend so the edges lie flat. For a pressurized pipe leak, use a repair specifically rated for the line pressure.

Plan Outdoor Repairs for a Dry Day

Give the adhesive a clean, dry surface to grip. For a patch exposed to direct sun or seasonal temperature swings, check the product’s service limits as well as the recommended temperature for installation.

How to Apply

  1. Wipe away dirt, grease, and loose debris. Let the surface dry.
  2. Cut a strip long enough to extend past both ends of the repair.
  3. Center it over the seam and peel back the release liner as you lay it down.
  4. Press from the center toward the edges to smooth out trapped air. Press firmly along the perimeter.

Standard shipping is US$5.99. Orders of US$80 or more ship free.

Measure your seam and pick up a roll for your next gutter or panel repair.

You may also like